Top Ad 728x90

Court of the Dead

Mar 7, 2012

Kickstarter to fund Tenacious Toys Exclusive Scott Tolleson Uncle Argh NOIR

by
We are incredibly excited to announce our first Kickstarter project, which is intended to fund our first full run of an exclusive toy: the Uncle Argh NOIR figure is the second colorway of Scott Tolleson's popular 5" Toy2R Mini Qee. Scott is super stoked about this colorway and we are incredibly fortunate and thankful to him for allowing us to take this colorway and run with it. 

The Kickstarter campaign ends on May 1st. Our goal is to raise just enough money to fund the entire 500-piece run of toys, plus the fees associated with Kickstarter campaigns, and the shipping. To that end, we have made this Kickstarter an easy one to fund: a $30 pledge gets you the Uncle Argh NOIR figure ($30 flat, including shipping, no matter where you live!). Lesser pledges get you a sticker pack or a Tolleson print. Higher pledges get you orginal Scott Tolleson sketches, paintings, or even a custom Mini Qee which Scott will make specifically for you using the Mini Qee platform of your choice!

Once May 1st hits, assuming we reach 100% funding, the money is charged to your credit card. Then it goes thru Kickstarter to us, and we send it along to Toy2R to get production started. After that, it takes about 2 months for the figures to be produced and shipped to the US. So we are looking at an arrival in July/August.

As I type this, we've already scored our first $100 pledge! I'm so excited I think I'm going to pass out.

Please click here to donate to this Kickstarter project! And please share the project online whether you donate or not. I've spent 2 years pounding this keyboard, helping promote up & coming artists, startup companies and even OTHER toy shops, so I know very well how incredibly important it is for all of us to share information on Facebook, Twitter, etc. Please help us get this project funded!

Mar 6, 2012

Argonaut Resins 8" HellCat release TONIGHT

by

Argonaut Resins has again teamed up with Robbie Bush (aka DJ McBoing Boing) to start the launch of the all new 8 inch Tuttz artist custom series. In this new release Robbie continues his hellish flame theme carried over from his custom run on the Pharaoh Hound resins with these all new 8 inch Tuttz Hell Cats. The series will include a Mono gray tone Hell Cat, a Hell freeze over blue Hell Cat, a Hell Cat light and 2 Hell Cats dark. 

These 5 customs will go on sale Tuesday March 6 at 10PM Est. time in the Argonaut Resins online STORE. That's TONIGHT. Set your alarms.



There will a lot of other uber talented guest artists invited to take part in this 8 inch Tuttz custom series throughout the year and we will do our best to make it fun and exciting. The Tuttz figurine now comes in three sizes - 3.5 inch, 6.5 inch and 8 inches.


Bugshub Bugsta resin figures available now

by
Michael Krenzin (aka Bugshub), an artist from Berlin, shares with us his newest resin figure: Bugsta! This 4 inch tall resin piece is handmade, handpainted with a gloss finish, and signed. You can purchase Bugsta in several colorways here
Also, keep up with Bugshub on Facebook here and on his website here.

New MCA mini figure series & Sun Min Spider Boom Series 2

by
Incoming this year from Toy2R: A brand-new blind-boxed 3" mini figure artist series based on the new 3" MCA Ape platform. Lookit all those names!

Also, a second series of Sun Min's ridiculously cute Spider Booms. Spider Boom Series 2 will also be an artist series featuring the work of some of our favorite toy artists and customizers! How killer is this news? 

We will be stocking both series; email us if you're interested in them as we'll be filling orders for early inquiries first. Toy2R lets us open the blinds so we'll also be selling open-box once these arrive.

SNEAK PEEK: Rab_beatZ DIY figure in development

by
Andrea Mancuso sends us these images of her upcoming DIY figure called Rab_beat. 
Here's what she said:
I'm a 3d character designer, and I've started the production of my DIY toy. I'm already waiting for the prototype and soon I'll start the production, so i thought to spread the news about it. You can see the project on my behance profile and soon i'll update the toy pics. Hope you'll like it.

Info: this is the solid and rounded version of my rab_beatz papertoys. The first version was made of one piece and after morkone's and seacreative's "custom-test" i decided to split it in parts to let the artists free to paint and customize it in any way they want.I plan to make this figure around 7.5” tall.
This is the link of the squared paper version project

here is my behance project page:

Here are some customs based on the platform:

Paulyvinyl Paul Kaiju show at TAG open now

by
Toy Art Gallery is proud to present “Paulyvinyl State of Mind” by the legendary Paul Kaiju! Paul’s work needs no introduction; as a top-notch painter, sculptor, and toy designer he has taken the toy world by storm with his extremely original designs that are influenced by everything from Japanese Kaiju to 60’s Sci-Fi to cheap squeaky toys. Be it Japanese soft vinyl or hand-casted resin, Paul’s creations are truly unique and exquisitely crafted. He now brings this expertise to his first solo show at Toy Art Gallery with a multitude of his various characters in one-offs and editions in vinyl and resin, along with some big surprises!

“PAULYVINYL” is a limited engagement runs through Mar. 18th.

Toy Art Gallery’s new showroom is located at 7571 Melrose Ave. Hollywood CA 90046.

Mar 5, 2012

TYO Toys' MQ Chevy Van

by
This is a 1:64 diecast Matchbox Chevy Van with MQ artwork on both sides. 

Originally cast in 1979 by Matchbox/Mattel, these blank vans sat for years forgotten in the stock room of a warehouse in New Jersey. TYO discovered them in 2011 the VanDal series was born.
The first participating artist is MQ, see more of his work at http://mqism.com and http://tyotoys.com/graffititoys/mq-van

I really dig this type of piece- way before I discovered designer toys, I used to collect Matchbox and Hot Wheels in a big way. Apparently my Mom potty-trained me by bribing me with a Matchbox car. Seriously. I couldn't even make up a story that embarrassing.



Splurrt Ugly Unicorn Exclusive Series

by
Splurrt has been working closely with Jon Malmstedt of Rampage Toys lately on a few cool toy projects. These are Splurrt's exclusive custom Ugly Unicorns:

Is the Ugly Uniorn crazy, angry, extra hungry for cupcakes? Who knows, but one thing is for sure, he's uglier than ever.
I've sculpted the pupils and tongues onto every Ugly Unicorn by hand using epoxy resin. Every expression is 1-of-a-kind, They are finished with air brush sprays.

You can purchase the Splurrt Ugly Unicorns here.

Back to Daylight custom Munny by Los Agge

by
 Just got these images of a cool custom 7" Munny by an artist I had never heard of Los Agge (aka Aggelos Gargavanis). Back to Daylight was painted with acrylics and it's for sale here
Love discovering new artists to post about!

'Nam Dunny Series by DCAY

by
'Nam Dunny Series, originally uploaded by DCAY574.
Matt "DCAY" Melville sends us images of his newest work: the 'NAM Dunny Series! 
Matt writes: 
I'm an artist from South Bend, IN (real close to Chicago). I have a background in graffiti and other forms of art. I have been customizing since 2007 and I feel that I am ready to show my stuff to a bigger audience now.
The fist pics are of my newest series 'Nam, a set of four 3" Dunnys. If I get enough positive feedback or if people what another one, I will set up a "draft" and enlist new troops.
To see more pics of this series, and other work by DCAY, click here.

Mar 4, 2012

Scott Kinnebrew Fang custom Qee for So So Happy show

by
Scott Kinnebrew sends us his submission to the So So Happy custom show, which involves custom Qees from over 30 artists. I must admit that despite keeping tabs on almost everything that Toy2R does, I had no idea who or what So So Happy was. So I went to their website... and I still have no idea. Apparently they are a California studio that makes stuff and donates to charity. They seems to have many characters that they license out. I DID manage to figure out that Scott's Fang custom is based on one of their characters, which is available as a plush here. Of course, Scott stuck Fang in a Stormtrooper suit! Cool custom. Here's more pics of Scott's custom Fang:

Scott writes:
Here's the Qee I'm dropping on the Toy2R / So So Happy show.  He started out as a Pig, but got a few mods and some homemade armor to wrap up the look.

I picked "Fang" after I read all the different bios because he looks like a devil, he's into custom toys, loves Mongolian BBQ, and he dresses like a Stormtrooper at Renaissance Fairs...seemed like my kind of dude.  I haven't done a Qee in a while, and it reminded me of how much I like the platform.


Mar 3, 2012

Domo & Friends set in stock now

by
From left to right: Tashanna, Domo & Mr. Usaji
This sweet boxed set features Domo and his 2 buddies, all seen on Japan's NHK TV station. These figures are about 4 inches tall each. In case you have no clue what is happening here, Domo is NHK's official spokesmonster. I've never seen any toys here in the US that featured all 3 of these characters, but they're here now! So I snagged a case. Buy the set here for only $17.99. 
Yes, everyone will think you're weird. It's OK.

Daniel Yu releasing his OMFG Crawdad Kid APs and customs Sunday

by
Daniel Yu was a part of the AWESOME October Toys Kickstarter-funded project called OMFG! (outlandish mini figure guys). The 2" figures in this series are an homage to our beloved M.U.S.C.L.E. men figures we all played with 20 years ago... all sculpts were developed by members of the designer toy community, and crowd-funded by artists, toy collectors and shop owners like myself!

Daniel is releasing his Artist Proof edition hot pink Crawdad Kid figures, as well as a bunch of custom Crawdad Kids, today. Go here to his store to buy them at 9PM EST tomorrow (Sunday March 4th), or check out his blog post here for more info and pics.

"Lobster Soup" hot pink AP edition Crawdad Kid ($6 each)
"Scourge of the Seven Seas" custom Crawdad Kid ($20 each)

Playge SQUADT fr0g s001 and K11 SPOT [SWAMP DWLLR]

by
The next Playge release- the SQUADT fr0g s001 and K11 SPOT [SWAMP DWLLR] set- is limited to  200 sets and will cost $115 total including shipping. fr0g is 6" tall.

(Note that Tenacious Toys will NOT be selling these- this one is a direct-to-consumer sale. You gotta buy em from Jamungo, and you have to buy them on Monday. These WILL sell out immediately).

The release is set for Monday, MARCH 5, 12:00 noon central time  (Austin TX)
Available at the squadt store>>  http://store.projectsquadt.com



fr0g includes: wetsuit, tanks, flippers, spear gun, sMP5, tanto knife, 2.0 articulated and 'classic' arms and removable helmet.



K11 spot includes: wetsuit with pouches, flippers, removable helmet.

Clutter Exclusive PINK Gipper/Reagan Bust By Frank Kozik

by
Clutter is excited to announce their exclusive HIGHLIGHER PINK color-way of the Gipper/Reagan bust from art toy mastermind Frank Kozik! Part of his series of irreverent busts of 20th century political demagogues, The Gipper follows Mao, Stalin, Che and others to get Kozik's ultraviolence treatment.

Limited to just 50 pieces, the pink Gipper/Reagan bust will be ready to ship the end of this week. Priced at $200 - who doesn't love a hunk a chunk of pink vinyl?? Standing at 15" tall, he comes complete with removable "Destroy" plaque. Preorder your Pink Gipper here!

Mar 1, 2012

casting shadows pain — signature edition available

by
Casting Shadows- Signature Edition from Coarse Toys is now available to us. Retail price will be around $362 per set (don't hold me to that). Email us if you're interested as we'd need to place our order now. The figures are made and almost ready to ship to the US.

Featuring two vinyl figures, "noop" – arched in misery and "nism", peering from under his protective husk – complete with sharktooth warning markings. The set comes with a fabric kite, floating above the scenery and a set of typographic leaves, spelling out "coarse".

The assemblage speaks love, vulnerability, betrayal and revenge, all intertwined to create a unsettling perspective of the future. Bringing the declining mood of all coarse creations to a tipping point.

The ill-fated pair comes sheltered in soft black sponge, and packaged in a smooth matte-black box. Sheathed in a casting shadows sleeve complete with interactive pop ups – a nism teeth shield "love ends" and a noop blood gate "time to harvest", waiting for you to test the balance of their drastic detachment.



Suckadelic Gay Empire resin action figures in stock

by
The Gay Empire figure is 3.75" resin figure on a silk screened card back, made by the Sucklord here in New York City. This was supposedly the first openly gay action figure, as reported by one of the local papers here in NYC. It's also the first time we've been afforded the opportunity to stock a Suckadelic figure in our shop! Each handmade piece is assembled and "splattered" by the Sucklord himself. 
The Sucklord uses local sweatshop labor to actually pour the resin, as lowly task which he no longer wishes to do. What a bastard! 
The fame is going to his head. Expect a Britney Spears-style meltdown from him soon.
Buy your Gay Empire figure here.

AW177 custom Mickey Mouse figure for PlayImaginative

by
Our good friend, local artist AW177, got one of the 6.5" Mickey platforms in the mail from PlayImaginative, and in true AW177 style, he used bold graphics and cultural iconography to create this "Dragon Ninja" custom.



Allen writes:
I have a bit of news - I was asked by Play Imaginative to custom one of their 6.5" Mickey Mouse vinyl art figures.  This piece will be displayed at shows by Disney/Play Imaginative and will be up on their website.

To celebrate the year of the dragon 2012, I made Mickey into a "Dragon Ninja", complete with equipment belt, shurikens, pouches for gear, striking/climbing knives, dragon claws on feet and hands, and nunchucks! You can place the nunchucks into the back for storage.  Dragon symbol on the upper ear, black outlines to give it a more animated/cartoon feel.  This is my real first time sculpting, but I'm happy with the results.

This custom is based on one of the designs I submitted to Play Imaginative/Disney for possible production, so if you like to see it made, please let them know!

Pictures are up on my Flickr.

Rsin custom Bellicose Bunny "Quasi" bears some resemblance to the platform

by
Rsin also rocked a Bellicose Bunny for the Bellicosity show at TAG (March 23rd).

Rsin writes:
So the first 3 days of this piece I was ready to give up.  I ran into so many problems making this work.  I walked out of the studio a few times, cause I was ready to toss it against a wall.  But in the end I cleared my thoughts and made it work.  Now I love this piece.

Named this piece Quasi, cause growing up my lil sister had a rabbit named Quasimodo, and also the definition of Quasi is "Having some resemblance"  I took the original design by Nathan Hamill and just put my spin on it, but still resembles the original piece.


To follow Rsin, you have many options: Twitter, Facebook, Google Plus, Deviant Art, Flickr, and his shop.
BB-8 Star Wars Premium Format(TM) Figure
Court of the Dead The Chronicle of the Underworld Court of the Dead Book